Figure.13..Column ring in the correct position.
8. Seat the rack tapered-point into the bevel
that is cut into the column support tube
(seeFigure.12).
9. Slide the column ring onto the column with
the inside bevel in the down position until
the rack tapered-point seats into the bevel
(seeFigure.13).
10. Position the column ring so the table
bracketandrackcanjustrotatearound
the column without binding.
11. Carefully, snug the set screw to hold the
columnringinplace.Over-tighteningthe
column ring will distort or split the column
ring.
Column Ring
Bevel
Figure.12..Bevel and rack seated correctly.
Tapered Rack
Point and
Column Support
Tube Bevel.
Set
Screw
ASSEMBLY
-11-