Avoiding Potential Injuries | Woodstock W1680 specs

AVOIDING POTENTIAL INJURIES

SAFETY

Figure 2. Never drill, holding workpiece by hand.

Figure 3. Keep fingers away from spinning tool.

Fig. 4. Remove Switch Safety Key when not in use.

Figure 5. Unplug machine when changing bulbs.

-7-

Image 8

Woodstock W1680 instruction manual Avoiding Potential Injuries, Never drill, holding workpiece by hand

Contents

Drill Press Table Of Contents Woodstock Service and Support Introduction About Your NEW Drill Press Warranty and Returns Machine Specifications Safety First Additional Safety Instructions For Drill Presses Electrical Requirements 110V OperationExtension Cords Grounding Avoiding Potential Injuries Never drill, holding workpiece by hand Assembly Instructions Assembly Base/Column Secure base to floor Table Support Insert the pinion gear from the inside Table Support, Bottom of rack in position Head Stock Align pocket in headstock with column Installing Light Bulb Handles Drill Chuck and Arbor Chuck components identification Arbor Removal Seating arbor into spindle Adjustments Speed Change Spindle Adjustments More About Speed Changes Table Adjustments Changing table height with crank Operations Test Run Installing bit Drill Bit Changes Lubrication MaintenanceGeneral Table And Base Closure Possibility of mechanical damage or Your Notes Parts Base Slide BAR Warranty Card Woodstock INTERNATIONAL, INC