Collection Bags | Woodstock W1687 specification

Figure 14. Securing the upper bag threaded

band clamp.

Figure 15. Securing the lower bag quick-

release band clamp.

Collection Bags

There are (4) collection bags on the Model W1687. The upper bags can be identified by the SHOP FOX® logo. The upper bags are secured to the collector bodies by threaded band clamps and the lower bags are secured by quick-release band clamps.

1.Fasten the upper bags to the collector bod- ies by threading the bolts and locknuts through each band clamp as shown in Figure 14.

2.Fasten the lower bags to the collector bod- ies by means of the quick-release band clamps as shown in Figure 15.

3.Slide the fabric loops of the two upper bags over the upper support bracket hooks as shown in Figure 16.

ASSEMBLY

Figure 16. Attaching the bag loop
to the bracket	-15-
	-15-

Image 17

Woodstock W1687 instruction manual Collection Bags, Securing the upper bag threaded Band clamp

Contents

HP Dust Collector Page Table of Contents About Your New Dust Collector Woodstock Service And SupportIntroduction Machine Specifications Warranty And Returns Standard Safety Instructions Safety Keep proper footing and balance at all times HP Dust Collector Additional Safety Instructions For Dust Collector Never collect anything except wood dust Avoiding Potential Injuries 220V Operation Electrical RequirementsExtension Cords Grounding Unpacking Assembly Instructions Component Layout Clean Up Base General Outlet Duct Impeller/Motor Assembly Support Brackets Collectors Securing the upper bag threaded Band clamp Collection Bags Securing the 4-way inlet fitting Way Inlet Fitting System Grounding Wire inside and around pipe Material Selection Accessories Bird’s eye view of layout System Design Test Run Adjusting OutletOperations Lubrication MaintenanceCleaning Wear a respirator when Changing the bags Bag Cleaning Closure 220V Power Source Wiring DiagramPage Ring Gasket Warranty Card Woodstock INTERNATIONAL, INC