ASSEMBLY
General
While the main components of the Shop Fox® Model W1687 are assembled at the factory, some assembly is required. The following is the recommended sequence best suited for final assembly.
TOOLS REQUIRED: You will need a 12mm open end wrench and a Phillips head screwdriver.
Base
Position the base upside down to reveal the caster mounting brackets. Attach each of the (4) casters to the caster mounting brackets using (16)
Safety glasses must be worn to prevent serious personal injury!
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Make sure that your
machine remains unplugged during any assembly, adjustment or maintenance procedures. Ignoring this warning may result in serious personal injury!
