Model W1706 (Mfg. Since 8/10)

Tensioning Blade

A properly tensioned blade is essential for making accurate cuts, extending the life of the blade, and making many other bandsaw adjustments. For instance, every time you replace the blade, you must perform this procedure because all blades tension differently.

Note: Before you performed the Test Run, you set the blade to its approximate tension. The following procedure fine-tunes the blade tension to ensure accurate cutting results.

To correctly tension the bandsaw blade, do these steps:

1.

DISCONNECT BANDSAW FROM POWER!

2.

Move the upper and lower guide/support bearings

 

as far away from the blade as possible (refer to

 

Adjusting Blade Guide Bearings on Page 24 for

 

detailed instructions).

 

Note: This procedure will NOT work correctly if

 

the guide/support bearings are in contact with the

 

blade.

3.

Move the blade tension quick release lever all the

 

way right (as viewed from the rear of the machine)

 

to apply tension to the blade (see Figure 17).

4.

Use the tension knob on top of the bandsaw to

 

bring the upper edge of the indicator block to the

 

appropriate blade tension scale mark for the blade

 

width (see Figure 17).

Quick Release

SETUP

5.

Re-connect the bandsaw to power, then turn it ON

 

and wait for the blade to reach full speed.

6.

Decrease blade tension very slowly by rotating the

Tensioned for

a 3⁄8" Blade

Lever

 

tension knob counterclockwise (as viewed from

 

above) until the blade just starts to flutter or

 

vibrate, then stop decreasing the tension.

7.

Now, increase the tension by rotating the knob in

 

the opposite direction (clockwise) until the blade

 

stops fluttering, then rotate the knob another 1⁄4

 

turn clockwise.

8.

Turn the bandsaw OFF.

9.

Re-adjust the blade tracking (refer to Page 14) and

 

the blade guides (refer to Pages 22 and 24).

Figure 17. Example of tension control

settings

NOTICE

When not in use, move the tension quick release lever to the left to release blade tension, which will increase blade life and reduce machine wear.

-17-

Page 18 Page 20
Page 19
Image 19
Woodstock W1706 owner manual Tensioning Blade, To correctly tension the bandsaw blade, do these steps
Page 18 Page 20

W1706 specifications

The Woodstock W1706 is a versatile and robust woodworking machine designed to cater to both professional carpenters and woodworking enthusiasts. Renowned for its exceptional build quality and innovative features, the W1706 stands out in the crowded market of woodshop equipment.

At its core, the W1706 is a heavy-duty table saw, offering a powerful 1.5 HP motor that delivers reliable performance even under demanding load conditions. This motor is designed to provide efficient cutting power while maintaining low noise levels, ensuring a pleasant working environment. The saw can handle a variety of materials ranging from softwoods to hardwoods, making it suitable for an extensive range of applications.

One of the key characteristics of the W1706 is its precision-engineered cast iron table. This large, flat surface offers excellent stability and minimizes vibrations during operation, allowing for accurate cuts. The integrated T-slot miter gauge adds to the versatility, enabling users to make precise crosscuts and angled cuts with ease. Additionally, the table is equipped with an extendable infeed and outfeed support, facilitating the handling of larger workpieces.

Safety features are paramount in the design of the W1706. It includes a riving knife that helps prevent kickback, a crucial aspect of safe woodworking practice. The blade guard provides further protection, allowing users to operate the machine with a peace of mind. Moreover, the push stick and emergency stop button enhance safety, ensuring that operators can quickly disengage the machine if necessary.

The W1706 is also designed with user convenience in mind. Its easy-to-read scaled fence provides quick adjustments for different cutting widths, promoting efficiency without compromising accuracy. The saw is fitted with a dust collection port that connects to a vacuum system, significantly reducing mess and ensuring a clean workspace.

In addition to its impressive features, the Woodstock W1706 is built for longevity. Constructed with durable materials, it is designed to withstand the rigors of daily use. With proper maintenance, users can expect this machine to serve them well for many years.

In summary, the Woodstock W1706 is a top-of-the-line tabletop saw that excels in performance, safety, and user convenience. Its powerful motor, precision engineering, safety features, and durable construction make it an ideal choice for anyone looking to elevate their woodworking projects to the next level. Whether for professional use or serious hobbyists, the W1706 is a reliable tool that truly embodies quality craftsmanship.
Top Page Image Contents