Model W1706 (Mfg. Since 8/10)

Operation Overview

The purpose of this overview is to provide the novice machine operator with a basic understanding of how the machine is used during operation, so the machine controls/components discussed later in this manual are easier to understand.

Due to the generic nature of this overview, it is not intended to be an instructional guide. To learn more about specific operations, read this entire manual and seek additional training from experienced machine operators, and do additional research outside of this manual by reading "how-to" books, trade magazines, or web sites.

To complete a typical operation, the operator does the following:

1.Examines the workpiece to make sure it is suitable for cutting.

2.Adjusts the fence for the width of the cut and then locks it in place.

3.Adjusts the table tilt, if necessary, to the correct angle of the desired cut.

4.Loosens the guide post lock knob, adjusts the blade guide height to between 1⁄4" and 1" from the top of the workpiece using the guide post elevation handwheel, then tightens the guide post lock knob.

5.Checks to make sure the workpiece can safely pass all the way through the blade without interference from other objects.

6.Puts on safety glasses and a respirator.

7.Starts the dust collector and bandsaw, and waits for the blade to come to full speed.

8.Holds the workpiece firmly and flatly against both the table and fence, and then pushes the workpiece into the blade at a steady and controlled rate until the workpiece moves completely beyond the blade.

The operator is very careful to keep fingers away from the blade and uses a push stick to feed narrow workpieces.

9.Stops the bandsaw.

Disabling & Locking

Switch

The ON/OFF switch can be disabled and locked with the provided padlock (see Figure 34). While the padlock is inserted through the ON button, the motor cannot be started, which reduces the risk of accidental startup by children of unauthorized users.

Padlock

Installed

Figure 34. Padlock installed in the switch.

Children or untrained people can be killed or seriously injured by this machine. If the machine is accessible to children or other people, always disable and lock the switch before leaving the machine unattended. Place the key in a well-hidden or secure location.

NOTICE

The switch can only be disabled if the installed padlock shaft meets the minimum diameter shown below; otherwise, the shaft may be too small to properly disable the switch.

Minimum Shaft Diameter = 0.192" – 0.2" (4.8 – 5mm)

OPERATIONS

-27-

Page 28 Page 30
Page 29
Image 29
Woodstock W1706 owner manual Operation Overview, Disabling & Locking Switch
Page 28 Page 30

W1706 specifications

The Woodstock W1706 is a versatile and robust woodworking machine designed to cater to both professional carpenters and woodworking enthusiasts. Renowned for its exceptional build quality and innovative features, the W1706 stands out in the crowded market of woodshop equipment.

At its core, the W1706 is a heavy-duty table saw, offering a powerful 1.5 HP motor that delivers reliable performance even under demanding load conditions. This motor is designed to provide efficient cutting power while maintaining low noise levels, ensuring a pleasant working environment. The saw can handle a variety of materials ranging from softwoods to hardwoods, making it suitable for an extensive range of applications.

One of the key characteristics of the W1706 is its precision-engineered cast iron table. This large, flat surface offers excellent stability and minimizes vibrations during operation, allowing for accurate cuts. The integrated T-slot miter gauge adds to the versatility, enabling users to make precise crosscuts and angled cuts with ease. Additionally, the table is equipped with an extendable infeed and outfeed support, facilitating the handling of larger workpieces.

Safety features are paramount in the design of the W1706. It includes a riving knife that helps prevent kickback, a crucial aspect of safe woodworking practice. The blade guard provides further protection, allowing users to operate the machine with a peace of mind. Moreover, the push stick and emergency stop button enhance safety, ensuring that operators can quickly disengage the machine if necessary.

The W1706 is also designed with user convenience in mind. Its easy-to-read scaled fence provides quick adjustments for different cutting widths, promoting efficiency without compromising accuracy. The saw is fitted with a dust collection port that connects to a vacuum system, significantly reducing mess and ensuring a clean workspace.

In addition to its impressive features, the Woodstock W1706 is built for longevity. Constructed with durable materials, it is designed to withstand the rigors of daily use. With proper maintenance, users can expect this machine to serve them well for many years.

In summary, the Woodstock W1706 is a top-of-the-line tabletop saw that excels in performance, safety, and user convenience. Its powerful motor, precision engineering, safety features, and durable construction make it an ideal choice for anyone looking to elevate their woodworking projects to the next level. Whether for professional use or serious hobbyists, the W1706 is a reliable tool that truly embodies quality craftsmanship.
Top Page Image Contents