Manuals / Avocent / Computer Equipment / Switch

Avocent KVM over IP switch ¾ The Membrane Buttons Port PS/2 IP-KVM Switch, PC port LED Indication

Models: KVM over IP switch

1 69

Download 69 pages 22.21 Kb

Page 23

8/16 PS/2 KVM over IP switch

Figure 5-1. The Internet Explorer displaying the encryption key length

Newer web browsers do support strong encryption on default.

5.2 Using PS/2 KVM over IP switch as a KVM switch

The power on state of 8/16 port PS/2 KVM over IP switch:

When you power on KVM switch, it will ask you the password, the default password value is eight zero –“ 00000000 “. Please key in eight zero and enter the same value at retype field. Note: Before you are not familiar with the operation of OSD manual, please don’t change the password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the password and unfortunately forget the password, you need send it back to your distributor for maintaining the password.

¾The Membrane Buttons

8 port PS/2 IP-KVM Switch

The Push Buttons 1 ~

8 :

Pressing the individual button to get PC port you want.

16 port PS/2 IP-KVM Switch

	1/9		8/16
	The Push Buttons	~		:

Pressing the individual button to get PC port you want. To press both “Shift “ button and port 1(or port 2,3,4,5,6,7,8) individual button simultaneous to get PC port 9 (10,11,12,13,14,15,16) respectively.

For example: The user would like to switch console port to PC port 12. He can press “Shift“ button and port 4 button simultaneously. The port LED of PC port 12 is lit when the console is switched to PC port 12.

PC port LED Indication :

There are two LEDs--- Power LED (The LED is marked by “ P “) and Link LED (The LED is marked by “ O “ ) accompanied with each PC port.

When you select one of sixteen PC ports and this PC is shut down or this PC port is disconnected to the PC, the selected power port LED is off (But, if this PC is PC99 type, the selected power port LED is lit) and the Link LED is flash. When you select one of sixteen PCs ports and this PC is powered on, the selected port Link LED and power LED is lit.

Note: If there are one of rack mount of KVM switches you used is 16 port IP-KVM switch,

20

Image 23

Avocent KVM over IP switch user manual ¾ The Membrane Buttons Port PS/2 IP-KVM Switch, PC port LED Indication

Contents

Rev USER’S Manual Table of Contents Menu Options Video modes Quick Installation GuideInstallation Initial IP configuration Remote Console Web interface 16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM switch Technical specifications Model No VGA Cable System requirement Model No Ports PS/2 IP-KVM switchModel No Ports PS/2 IP-KVM switch Cable diagrams PS/2 Cable PS/2 to DB9 adapter Optional Step Hardware installationConnecting PS/2 IP-KVM switch to the host system Operation Overview Local console Internet Connecting the External Reset/Power Option PS/2 IP-KVM switch Setup Tool ConfigurationInitial Configuration Initial configuration via Dhcp server IP-KVM switch setup tool Authentication IP address Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configuration Auto mouse speed and mouse synchronization 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Host system mouse settings Special Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Recommended Mouse Settings Telnet UsagePrerequisites PC port LED Indication ¾ The Membrane Buttons Port PS/2 IP-KVM Switch ¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To get out of Auto Scan Mode, Press any key or Space bar To select PC port Hot Plug Daisy Chain Connection On Screen Display Operation 16 PS/2 KVM over IP switch Login screen Login into the PS/2 IP-KVM switch and logout Main Navigation Remote Console General description Logout from the PS/2 IP-KVM switch Remote Console Control Bar Main Window Monitor Only Exclusive Access Mouse Handling Scaling Local Cursor Video Settings Brightness PhaseReset this Mode Reset all Modes Soft Keyboard Save changesUndo Changes 14. Remote Console Confirmation Dialog Remote Console Status Line Menu Options Remote Control KVM Console 16 PS/2 KVM over IP switch Users And Groups Change Password User Console KVM Settings 15. User Console Settings Part 16 PS/2 KVM over IP switch Keyboard/Mouse 17. Keyboard and Mouse Settings Video 18. Video Settings Network 4Device Settings 16 PS/2 KVM over IP switch 20. Dynamic DNS Dynamic DNS 16 PS/2 KVM over IP switch 22. Device Security Security Certificate 23. Certificate Settings 24. SSL Certificate Upload 25. Serial Port Serial Port 16 PS/2 KVM over IP switch 27. Date and Time Date And Time 29. Event Log Event Log 16 PS/2 KVM over IP switch Board Summary Device Information 32. Event Log List Reset Functions 33. Update Firmware Update Firmware 34. Unit Reset Unit Reset Troubleshooting CE Certificate Certificates Pin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes