Woodstock W1736 SET UP

SET UP

-7-

W1736 Overarm Router

The SHOP FOX® Model W1736 has been carefully pack-

aged for safe transporting. If you notice the machine has

been damaged, please contact Woodstock International

Technical Support at 1-360-734-3482 or send e-mail to:

tech-support@shopfox.biz

READ and understand this entire instruc-

tion manual before using this machine.

Serious personal injury may occur if

safety and operational information is not

understood and followed. DO NOT risk

your safety by not reading!

SET UP

The following items are needed, but not included, to

setup your machine:

• Air Compressor .............................................1

• Air Hose with 3/8" Female Quick Connect Fitting ...1

• Hex Wrench 6mm ..........................................1

• Hex Wrench 8mm ..........................................1

• Phillips Screwdriver .......................................1

• Open-End Wrench 12mm .................................1

• Open-End Wrench 17mm .................................1

• Router w/Removable Base ...............................1

• Mounting Hardware Specific to Application .... Varies

The table and other unpainted parts of your overarm

router are coated with a waxy grease that protects them

from corrosion during shipment.

Clean this grease off with a solvent cleaner or citrus-

based degreaser. DO NOT use chlorine-based solvents

such as brake parts cleaner or acetone—if you happen to

splash some onto a painted surface, you will ruin the fin-

ish.

MAKE your shop “child

safe.” Ensure that your

workplace is inaccessible

to youngsters by closing

and locking all entrances

when you are away. NEVER

allow untrained visitors in

your sho p when assem-

bling, adjusting or operat-

ing equipment.