-18-

MAINTENANCE

W1736 Overarm Router
MAINTENANCE

Lubrication

The air cylinder must be lubricated regularly. For best
results, install a lubricator in your air line.
If you do not have a lubricator installed in your air line,
put two drops of 30 WT non-detergent oil directly into
the air hose that connects to the foot switch. Repeat
this weekly.
Regular periodic maintenance on your SHOP FOX®
Model W1736 will ensure its optimum performance. Make
a habit of inspecting your table saw each time you use
it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts
• Damaged or leaky air hoses
• Loose or leaky air fittings/valves
• Cracked eye shields/guards
• Loose router bit in collet
The table can be kept slippery with regular applications
of a non-staining, woodworking friendly lubrication.

Table

General

MAKE SURE that your machine is
unplugged during all maintenance pro-
cedures! If this warning is ignored, seri-
ous personal injury may occur.