Woodstock W1793, W1794 owner manual Cleaning & Lubrication

Models: W1794 W1793

1 20
Download 20 pages 32.79 Kb
Page 12
Image 12

Model W1793/W1794 Professional Spray Gun

CLEANING & LUBRICATION

Cleaning

Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper cleaning will not be covered by the war- ranty. Clean the spray gun immediately after each use.

To clean your spray gun:

1.Spray a small amount of solvent through the spray gun.

Note: Check with local laws regarding this practice. If you are spraying on a regular basis, spraying solvents into the air may be illegal. A cabinet style spray gun cleaner may be required.

2.DISCONNECT SPRAY GUN FROM AIR!

3.Unscrew the cup.

5.Unscrew the atomizing cap with your fingers and the fluid tip with the service wrench. The fully disassembled gun should look like

Figure 13.

6.Rinse these parts thoroughly in solvent then dry with compressed air or let air dry.

Note: If the small holes in the atomizing cap become blocked, soak in cleaning solvent. If the blockage still exists, clear the blockage with a small needle, taking great care to not enlarge or damage the hole. Damage to the hole will create a disrupted spray pattern.

7.Use the cleaning brush with solvent to clean the inner orifice and other hard to reach areas on the outside of the spray gun body.

8.Wipe the rest of the gun body with a shop towel and dry.

4.Disassemble the gun by unscrewing the fluid control knob, removing the spring and needle (Figure 13).

Fluid Tip

Strainer

Cup

 

Atomizing

Needle

Fluid

Cap

 

Control

 

 

Knob

 

Spring

 

Figure 13. Gun disassembled for cleaning.

-10-

EXPLOSION HAZARD! Chlorinated Solvents like Tricloroethane and Methylene Chloride (methyl chloride) can chemically react with aluminum and may explode. Many parts in spray guns are made of aluminum. Read solvent label carefully before using solvent.

NOTICE

DO NOT soak the spray gun body in solvent. Prolonged exposure to solvent will rapidly deteriorate the spray gun washers and seals. Ignoring this notice will void your warranty.

Page 12
Image 12
Woodstock W1793, W1794 owner manual Cleaning & Lubrication