Subaru Robin Power Products R600 Spark plug in advance, Remove the clamp of the high, Engine

Sequence Part to remove Description Precautions ! Necessary tools

16’ Rotor assembl) (1) Fit the rotor puller to th2 rotor shaft. and drive it into place to remove the rotor from the engine shaft.

1;	Plug cap	(1 j	Remove the plug cap from th2
			spark plug in advance.
		(3) Remove the clamp of the high-
			voltage power cable.
18	Front housing	(1 j	Remove the front	housing and
	and center		center baffle from	the engine
	baffle		main bearing. b) removmg thrze
			M6 x Xmm bolts and one M5
			x 55mm bolt.

’ Rotor puller Plastic hammer

1Omm box spanner

I j

(See Fig. 11.8.) t

CENTER BAFFL

FRO

Fig. 12-7 Fig. 128

Sequence		Part to remove
19	!	~
		Air cleaner

	Description	Precautions	Necessary tools
(1)	Remove the center screw of the		i?;s	Minus screw-
	air cleaner cover to remove the			driver
	cleaner cover. filter element. and
	element retainer.		A
(2)	Remove the M5 screw at the lower			Plus screw-
			\fi
	right inside the element chamber.			driver
(3)	Remove tvvo M6 flange nuts		i 1Ommbox
	clamping the air cleaner and the		spanner
	carburetor together to remove the
	air cleaner.	! (See Fig. 12-9.)	I

AIR CLEANER	ELEMENT & ELEMENT
*	RETAINER

ELEMEN/T ? Al R ‘CLEANER COVER

FIQ. 10-9

-35-