Subaru Robin Power Products R600 11-1-4AC RECEPTACLES, 7-4A, 11-1-5DC TERMINALS, BROWN WHITE Fig

11-1-4 AC RECEPTACLES

Using the circuit tester. check continuity between the t\vo terminals at the rear of the XC receptacles while the receptacle is mounted on the control panel. When continuity is confirmed between the output terminals of the receptacle Lvvltha \vtre connected across these terminals. the AC receptacle is normal. When the wire is removed and no continuity- is eonfirmed between these terminals. the receptacles are also normal.

Fig. 7 7-4(A) Fig. 1 l-4(81

11-1-5 DC TERMINALS

Csmg the circuit tester. check continuity between the DC terminals at the rear side of the control panel while they are mounted on the panel.

Ben continuity- is confirmed bet\veen the DC terminals Lvith a wire connected across these terminals. the DC terminals are normal. When the wire is removed and no continuity is <onfirmed between these terminals. the terminals are also normal.

Fig. 1 l-5

11-1-6 CIRCUIT BREAKER

Check continuity between each of two terminals at the rear of the circuit breaker while it is mounted on the control panel. Normally. there is continuity between each of the two lvhen the circuit breaker is on while there is no continuiq when the circuit breaker is ofi.

16P coupler wiring]

DARK BLUE

YELLOW

RED

BLACK

BROWN

WHITE

Fig. 11-6

- 26 -