Subaru Robin Power Products R600 manual I 3 4 5

12-3 DISASSEMBLY SEQUENCE

Sequence

1

-I

3

4

5

Part to remove

Side cover (Lj and (Rj

I

I

Couplsrs (dis- connection)

’ Choke cab12

Fuel line

I

’Fuel tank handle

I

I

IDescription

(1 j Remove both the left and right co\-2rs. by taking out eight 31-C flang2 screws.

1(1) Disconnect th2 (6Pj coupler of the generator from the other (6P) extending from the control panel.

	(1) Set the engine control to STOP.
I	and remove the screw from the
I	tip of the choke cable to dis-
	connect the choke cable from
	the dial plate.
	(2) Disconnect the outer cable of the
	choke cable from the fuel tank
	bracket.
	(3) Loosen the M4 screw of the
!	carburetor choke lever swivel to
	pull out the inner Loirefrom the
	choke cable.
	(1) Hold thz fuel line clamp inserted
	inside the felt strainer using pliers,
	and pull it backward to remove
	the fu21 line from inside the
	strainsr.

(1) Push up the end of the cover

Ifitted to the handle with finger. r (2) Pull out the rubber tube use; as

the air vent pipe.

a (3) Remove two bolts (tank). and remove the handle.

Precautions	I
	Necessary tools
!	2 PlUj screw-
	driver

Pull them under while pressing

1down the retainer claws.

622 Fig. 1Z-2.) !

rs Minus screw-driver

I

1 1Omm box spanner

13 Plus screw- driver

/ Be careful not to Pliers

’damage the hose. :

I

I	1Omm box
	I spanner

Fig. 12-2

-32-