Subaru Robin Power Products R600 manual

5)Float system

Pull out tloat pin (13) and remove float (I 1j and needle valve (,30).

*Avoid using a drill or a wire to clean the fuel passages(they map damage the orifice of the pilot and main jet nozzles’). Use compressed air.

*The float pin is peen-secured to the carburetor body; the needle valve and float can be removed out from the op- posite side of the peen-secured part b>-lightly striking the float pin with a thin bar-like object.

27		24
/	28	1'

Fig. 72-29

- 50 -