Subaru Robin Power Products R600 manual 6 7 8 9 10 11

Sequence

Part to remove Description Precautions Necessary tools

6

7

8

9

10

11

Rear cover	( 1)	Remove the rear :over at the
		opposing sid2 of the control
		pan21by unscrewing th2 four
I		$16 flange bolts.
Fuel tank	(.I)	Loosen the set screw of th2
		strainer shaft at th2 rear of the
		engine control switch.
	(2) Remove two M5 flange bolts
		clamping the front cover and
		tank bracket together. and tank
		bracket together. and then
		remove the fuel tank.
Front cover	(.l j	Rsmove two MS tlange bolts
		clamping the front cover to
		the basr to rrmove the front
,		cover.
Fuel hose	(1)	Using pliers. hold the fuel line
		clamp at the fuel support joint
I		of the carburetor (L-joint
		directed downward) to pull it
		aside. Then. pull out the line.
Choke cable	(1 j	Insert the tip of a screwdriver
		(.tlat-headed type) in the groove
		of the choke cable bracket pro-
		truding from the head cover.
I Muffler cover	(1)	Remove the out2r cover; this is
and muffler		done by removing sevenM5
		tapping screws.
!	(2)	R2move one M6 x 1’ flange
		bolt of the muffler bracket. and

	two M6 nuts from the muffler
	tlange. Then. remov2 th2 flange.
	(3) Remove four 315 x 8 lock screws
	from inside the muffler t I remove
I	the inner cover.

flUFFI

Fig. 123

1Ommbox spannsr

,z Plus screw- driver

,(,SeeFig. 1Z-3.) ! 1Omm box spanner

			1Omm box
			spanner
	Be careful not		Electricians’
	to damage the	!	pliers
’	fuel line.
			3	Minus
				screwdriver
	Take care not to		-3	Plus screw-
	drop the removed			driver
	screws down into
	the cooling air	!	IOmm box
1	channel.		spanner
’	(See Fig. 11.4.)
			3	Minus screw-
				driver

I

Fig. 124

- 33 -