Pioneer DEH-P700BT Selecting a Sirius channel directly, Switching the Sirius display

	Section
Available accessories	06

%Select a channel.

Push MULTI-CONTROL left or right.

#If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num- ber continuously.

#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel directly

When using the remote control, you can select the SIRIUS channel directly by entering the de- sired channel number.

1 Press DIRECT.

Channel number input display appears.

2Press 0 to 9 to enter the desired channel

number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The SIRIUS channel of entered number is selected.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Switching the SIRIUS display

%Press DISP to switch the SIRIUS display. Each press of DISP changes the SIRIUS dis- play in the following order:

Play time—Channel number—Channel name

—Category name—Artist name—Song title/

program title—Composer name

# Play time is displayed during the Instant Re- play mode. Refer to Using Instant Replay function on page 59.

#Play time display indicates the time inverted from the live broadcast. Play time is displayed in negative number.

Storing and recalling broadcast stations

You can easily store up to six broadcast sta- tions for later recall.

!Six stations for each band can be stored in memory.

%When you find a station that you want to store in memory press one of preset tun- ing buttons 1 to 6 and hold until the SIRIUS preset number stops flashing.

The number you have pressed will flash in the SIRIUS preset number indicator and then re- main lit. The selected station has been stored in memory.

The next time you press the same preset tun- ing button the station is recalled from mem-

ory.

# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

The function selection menu is displayed. Turn to change the menu option. Press to select.

3Turn MULTI-CONTROL to select the function.

MODE (channel select mode setting)— GAME ALERT (game alert setting)— TEAM SETTING (team setting)—GAME INFO (game info)—PAUSE (pause)

Available accessories

En 57