![](/images/new-backgrounds/1249375/249375119x1.webp)
Section
06
Available accessories
%Select a track
Push
%Fast forward or reverse
Push and hold
HD Radio tuner
Basic Operations
You can use this unit to control an HD Radio tuner
%Select a band
Press BAND/ESC.
# Band can be selected from among FM1, FM2, FM3 or AM.
%Manual tuning (step by step)
Push
%Seek tuning
Push and hold
#You can cancel seek tuning by pushing
3Use
Turn to change the station. Press to select.
# You can also change the station by pushing
# To return to the ordinary display, press
BAND/ESC or LIST.
# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.
Using the remote control
%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.
The next time you press the same preset tun- ing button the radio station frequency is re-
called from memory.
# You can also recall radio station frequencies assigned to preset tuning numbers by pushing
Storing and recalling broadcast frequencies
You can easily store up to six broadcast fre- quencies for later recall.
!Six stations for each band can be stored in memory.
1 Press LIST.
Preset screen is displayed.
2Use
Turn to change the preset number. Press and hold to store.
Switching the display
Desired information can be displayed.
%Press DISP.
Press DISP repeatedly to switch between the following settings:
Frequency or station
#Only when the tuner has been tuned in to an HD Radio broadcasting, display can be changed.
#When the tuner has been tuned in to an HD Radio broadcasting, default display is changed into station name instead of frequency.
60
En