Pioneer DEH-P700BT Using Instant Replay function, Switching the Game Alert on or off

	Section
Available accessories	06

Switching the Game Alert on or off

Once you made team selections, you need to turn the Game Alert function on.

!The Game Alert function is on at the default setting.

1Display the function selection menu. Refer to Introduction of advanced operations on page 57.

2Use MULTI-CONTROL to select

GAME ALERT in the function menu.

3Press MULTI-CONTROL to turn the Game Alert on.

The Game Alert function is now on.

# To turn the Game Alert function off, press MULTI-CONTROL again.

When the game of the selected team starts

When a game of the selected team is about to start (or is currently playing) on a different sta- tion, GAME ALERT is displayed. Press and hold MULTI-CONTROL to switch to that sta- tion, and you can listen to that game.

!If you do not operate the function within about 10 seconds, the display is automati- cally returned.

Displaying game information

If games of your selected teams are currently playing, you can display information of the games and tune to the broadcast channel. You can display information of the games while enjoying the sound from currently tun- ing station. You can also tune to the broadcast channel when you wish to.

1Display the function selection menu. Refer to Introduction of advanced operations on page 57.

2Use MULTI-CONTROL to select

GAME INFO in the function menu.

The game information of your selected team is displayed.

3Push MULTI-CONTROL up or down to select a game.

The game is displayed, followed by more de- tailed game information.

!Game score will be updated automatically.

4Press MULTI-CONTROL to switch to that station to listen to the game.

Notes

!If you have not made any team selections, NOT SET is displayed.

!When games involving your favorite teams are not currently playing, NO GAME is displayed.

Displaying the Radio ID

If you select CH 000, the ID code is displayed.

%Push MULTI-CONTROL left or right to select CH 000.

Note

To select CH 000, set the channel select setting to CH NUMBER. About the channel select setting, refer to Selecting the SIRIUS channel select mode on the previous page.

Using Instant Replay function

Following functions can be operated during the Instant Replay mode.

!To use this function, Pioneer SIRIUS bus in- terface (e.g. CD-SB10) is required.

!To use this function, SIRIUS plug-and-play unit with Instant Replay Function is re- quired.

!For details, refer to SIRIUS plug-and-play unit’s manuals.

%Performing the Instant Replay mode When SIRIUS tuner is selected as the source,

press and hold SAT MODE.

# In the following conditions, tuner exits from the Instant Replay mode.

—When BAND/ESC is pressed

—When another source is selected

Available accessories

En 59