Pioneer DEH-P700BT Calling a number in the preset list, Assigning preset numbers by using

	Section
Operating this unit	02

3Press MULTI-CONTROL to select a preset phone number that you want to delete.

4Press and hold MULTI-CONTROL to dis- play MEMORY.

Push MULTI-CONTROL up or down to switch

MEMORY (memory) and DELETE (delete).

# About assigning , Assigning preset numbers on the previous page.

5Select DELETE and then press

MULTI-CONTROL to delete the preset phone number.

Calling a number in the preset list

After finding the number you want to call in the preset list, you can select the entry and make a call.

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to select the

phone number.

# Press and hold DISP to scroll the phone num-

ber.

# If the phone number is already in the phone book, the corresponding name is displayed.

In this case, press and hold DISP to scroll the

name.

# You can also change the phone number by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to make a call.

4To end the call, press .

Assigning preset numbers by using

MULTI-CONTROL

1Push MULTI-CONTROL up or down to switch preset numbers.

2Perform from step 4 to 10 of Assigning preset numbers on the previous page.

Assigning preset numbers by using remote control

1Press thumb pad to display RECENT CALLS (call history list).

2Push thumb pad up or down to select a phone number.

3Press a number from 0 to 9 and hold to preset in memory.

Preset number 10 is assigned to 0.

Calling number in the preset list by using MULTI-CONTROL

1Push MULTI-CONTROL up or down to switch preset numbers.

2Press MULTI-CONTROL to make a call.

3To end the call, press .

Calling number in the preset list by using remote control

1Push thumb pad up or down to select a

preset phone number.

# Pressing a number from 0 to 9 also recalls the preset phone number.

2Press thumb pad to make a call.

#Pressing OFF HOOK can also make a call.

3 To end the call, press ON HOOK.

Introduction to advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

The function menu is displayed.

Turn to change the menu option. Press to se- lect.

Operating this unit

En 37