Pioneer DEH-P700BT operation manual Audio Adjustments Introduction of audio, Using the equalizer

Section
03		Audio Adjustments
	Introduction of audio		3 Push MULTI-CONTROL up or down to
	adjustments		adjust front/rear speaker balance.
			Each time MULTI-CONTROL is pushed up or
	1 Press MULTI-CONTROL to display the		down, the front/rear speaker balance moves
	main menu.		towards the front or rear.
	2 Use MULTI-CONTROL to select AUDIO.		FADER :F15 to FADER :R15 is displayed as the
			front/rear speaker balance moves from front to
	Turn to change the menu option. Press to se-		rear.
	lect.
			# FADER :F/R 0 is the proper setting when only
	The audio menu is displayed.
			two speakers are used.
	3 Turn MULTI-CONTROL to select the		# When the rear output setting is SUB W, you
			cannot adjust front/rear speaker balance. Refer to
	audio function.
			Setting the rear output and subwoofer controller
	Turn MULTI-CONTROL to switch between the
			on page 47.
	audio functions in the following order.
	FADER (balance adjustment)—P. EQ (equali-		4 Push MULTI-CONTROL left or right to
	zer recall)—EQ (equalizer adjustment)—EQ		adjust left/right speaker balance.
	(equalizer fine adjustment)—LOUDNESS
			Each time MULTI-CONTROL is pushed left or
	(loudness)—SUB W1 (subwoofer on/off set-		right, the left/right speaker balance moves to-
	ting)—SUB W2 (subwoofer setting)—HPF		wards the left or right.
	(high pass filter)—BASS BOOST (bass boost)		BALANCE :L15 to BALANCE :R15 is displayed
	—SLA (source level adjustment)		as the left/right speaker balance moves from
	# You can select the SUB W2 only when sub-		left to right.
	woofer output is turned on in SUB W1.
	# When selecting FM as the source, you cannot

switch to SLA.

#You can also select the audio function by pressing AUDIO on the remote control.

#To return to the display of each source, press BAND/ESC.

#If you do not operate functions within about

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

30 seconds, the display automatically returns to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.

1 Display the audio menu.

Refer to Introduction of audio adjustments on this page.

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM Custom

FLAT Flat

2 Use MULTI-CONTROL to select FADER.	SUPER BASS Super bass
# If the balance setting has been previously ad-
justed, BALANCE will be displayed.

42 En