824 |
|
| OS1731 |
Grease | Oil |
| 724 |
| OS1373 |
| Figure 8 |
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY. Read and understand Maintenance and Service Safety Rules in Safety section before attempting service or adjustments.
DISCHARGE CHUTE DEFLECTOR
Deflector must stay in selected position while throwing snow.
To adjust, loosen then retighten hardware to desired deflector drag force (Figure 9).
Adjusting
Hardware
Discharge Chute
Deflector
Figure 9 | OS0113 |
DISCHARGE CHUTE
If chute does not stay in position while operating, tighten nut on carriage bolt at pivot point to increase tension on spring (Figure 10).
Smooth and easy rotation of properly lubricated chute with crank is obtained by adjusting pinion and chute gear teeth so they mesh together.
GB - 20
