Pioneer DEH-P700BT Transferring entries to the phone book, Setting automatic answering

Operating this unit

Section

02

3Push MULTI-CONTROL left or right to move the cursor to the previous or next character position.

4Press MULTI-CONTROL to determine the ID and the password.

5After entering the ID and password, use your cellular phone to continue the procedure.

Transferring entries to the phone book

Phone books in your cellular phone can be transferred to this unit by using your cellular phone.

!400 entries for each user (max. 3 users) can be stored in the phone book. Each indepen- dent entry can hold three phone numbers and genres.

1 Display the function menu.

Refer to Introduction to advanced operations on page 37.

2Use MULTI-CONTROL to select

PH BOOK TRANSFER.

3Press MULTI-CONTROL to enter the phone book transfer standby mode.

4Use the cellular phone to perform phone book transfer.

Perform phone book transfer using the cellu- lar phone. For detailed instructions, refer to the instruction manual that came with your cellular phone.

When phone book transfer is completed,

DATA TRANSFERRED is displayed.

# The display indicates how many entries have been transferred and the total number to be transferred.

place automatically as soon as the two devices are less than a few meters apart.

!With some cellular phones, it may not be possible to perform the automatic connec- tion.

1 Display the function menu.

Refer to Introduction to advanced operations on page 37.

2Use MULTI-CONTROL to select

AUTO CONNECT.

3Press MULTI-CONTROL to turn auto-

matic connection on.

# To turn automatic connection off, press MULTI-CONTROL again.

Note

Automatic connection is performed in the regis- tration number order.

Setting automatic answering

1 Display the function menu.

Refer to Introduction to advanced operations on page 37.

2Use MULTI-CONTROL to select

AUTO ANSWER.

3Press MULTI-CONTROL to turn auto-

matic answering on.

# To turn automatic answering function off, press MULTI-CONTROL again.

Echo canceling and noise reduction

1 Display the function menu.

Refer to Introduction to advanced operations on page 37.

2Use MULTI-CONTROL to select

ECHO CANCEL.

Operating this unit

Setting the automatic connection

It is possible to set the automatic connection between your cellular phone and this unit. If this function is set to on, connection between your cellular phone and this unit will take

3Push MULTI-CONTROL left or right to select the desired setting.

OFF (off)—LOW—MID—HIGH

# This function can be performed even while talking on the phone. In this case, press MULTI-CONTROL to switch to ECHO CANCEL.

En 39