Pioneer DEH-P700BT operation manual TV tuner, Multi-Control

	Section
Available accessories	06

!When playing back compressed audio, if you select another folder during repeat play, the repeat play range changes to DISC.

!When playing back compressed audio, if you perform track search or fast forward/reverse during TRACK, the repeat play range changes to FOLDER.

!Multi-DVD player that has ITS functions and disc title functions can also be connected to this unit. In this case, ITS PLAY, ITS MEMO and disc title input can be controlled.

!The ITS function of a DVD player differs slightly from ITS playback with a multi-CD player. With multi-DVD player, ITS playback ap-

plies only to the CD playing. For details, refer to Using ITS playlists on page 63.

TV tuner

Basic Operations

You can use this unit to control a TV tuner, which is sold separately.

For details concerning operation, refer to the TV tuner’s operation manual. This section pro- vides information on TV operations with this unit, which differs from that described in the TV tuner’s operation manual.

%Select a band Press BAND/ESC.

%Select a channel (step by step) Push MULTI-CONTROL left or right.

%Seek tuning

Push and hold MULTI-CONTROL left or right, and then release.

Notes

!Band can be selected from TV-1 or TV-2.

!You can cancel seek tuning by pushing MULTI-CONTROL left or right.

!While pushing and holding MULTI-CONTROL left or right, you can skip stations. Seek tuning starts as soon as you release

MULTI-CONTROL.

Storing and recalling broadcast stations

You can easily store up to 12 broadcast sta- tions for later recall.

!12 stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected station in memory.

Turn to change the preset number. Press and hold to store.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

Using the remote control

You can also store and recall stations assigned to preset tuning numbers P 1 to P 6 by using the remote control.

%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.

The next time you press the same preset tun- ing button the station is recalled from mem-

ory.

# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

Available accessories

En 67