Pioneer DEH-P700BT Resetting the microprocessor, Use and care of the remote control

Before You Start

Section

01

3Put the front panel into the provided protective case for safe keeping.

Attaching the front panel

%Reattach the front panel by holding it upright to the unit and clipping it securely into the mounting hooks.

%Press RESET with a pen tip or other pointed instrument.

RESET button

Before You Start

Resetting the microprocessor

The microprocessor must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

Use and care of the remote control

Installing the battery

Slide the tray on the back of the remote con- trol out and insert the battery with the plus (+) and minus (–) poles aligned properly.

!When using for the first time, pull out the film protruding from the tray.

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, consult a doc- tor immediately.

CAUTION

!Use one CR2025 (3 V) lithium battery.

!Remove the battery if the remote control is not used for a month or longer.

!There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

!Do not handle the battery with metallic tools.

!Do not store the battery with metallic objects.

En 9