Model W1800
Spray Gun Holder
Instruction Sheet
Phone #: (360)
Introduction
Your new Model W1800 Spray Gun Holder (Figure 1) is designed to hold a spray gun and a paint filter.
Inventory (Figure 1) | Qty |
A. Spray Gun Holder Base | ...................................1 |
B. Filter Holder | 1 |
FIRE HAZARD! Mount the spray gun holder in a location away from potential ignition sources. Many paints and liquids are flammable. Ignoring this warning may lead to serious personal injury.
Workbench Mounting
Attach the spray gun holder base to a workbench using two #12 tap screws (not included).
Note: Consider mounting the base to the front of a work- bench with the rings facing out for convenience. This also ensures that a spray gun equipped with a pressure gauge or adapter will not hit the bench when mounted on the holder, as shown in Figure 2.
Wall Mounting
Mount the spray gun holder base to a wall with drywall anchors or fasten it to a board attached to studs using #12 tap screws.
A
B
Figure 1. Model W1800 inventory.
Holder |
Filter |
Base |
Mounting |
Holes |
Figure 2. Model W1800 setup to filter
paint.
Holder Assembly & Operation
1.Assemble the base and holder, then position the spray gun and filter (not included), as shown in Figure 2.
2.Pour paint into the filter; it should flow into the feed cup.
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC.
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#9573BL | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in China |
