INSTRUCTIONS
The Universal Pallet Fork attachment is designed to fit most farm tractor
Be sure tires and rims are in good condition. Inflate tires to the proper recommended air pressure.
The Universal Pallet Fork will also work on the rear of tractors with a Category II 3 pt. hitch.
The model
WARRANTY DOES NOT COVER BENT FORKS.
TRACTOR REQUIREMENTS
AND PREPARATION
——————————————————
The required size of the tractor and front loader or skid steer will be determined by the weight of the load to be handled.
Always use a tractor and front loader or skid steer large enough to safely handle the load.
Check your tractor and front loader or skid steer to make sure they are in good working condition. Check all frame mounting bolts to make sure they are tight.
Loaders that attach to the tractor frame rails should have a
WARNING!
The use of any loader attachment is NOT recom- mended on tractors with a tricycle wheel arrange- ment. Tricycle type tractors are unstable for front loader use.
NOTE: Loaders with only one hydraulic cylinder in the center of the loader to tilt the bucket or attachment may be used with the addition of an optional center bracket (order bracket #830320).
Check the tractor’s hydraulic system. Be sure the hydraulic oil and filter have been serviced according to manufacturer’s recommendations. Refer to your tractor or loader operator’s manual or dealer for any adjustments necessary to put the hydraulic system in good working order.
WARNING!
Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS systems in “locked up” position at all times.
CAUTION!
Be sure your tractor and loader are in good condi- tion. Read all the safety precautions and make sure all equipment operators are familiar with the safety rules of operation.
The operator is responsible for the safe operation of this equipment. The operator must be properly trained. Operators should be familiar with the tractor, loader and loader attachment, and all safety practices before start- ing operation. Read the safety rules and safety signs on pages
WARNING!
A heavy load can cause instability in driving a tractor. Make sure the rear of the tractor is properly
–especially around turns. An unstable tractor could steer badly and possibly tip over, causing injury or death.
ASSEMBLY – TRACTOR LOADERS
PIN ON ATTACHMENT
This unit is shipped almost completely assembled. Carefully follow instructions for final assembly.
Preview the assembly instructions and the exploded views of the pallet fork in your operator’s manual and become familiar as to how the parts or assemblies go together.
14
