OWNER SERVICE
MAINTENANCETRANSPORTING
—————————————————— ——————————————————
WARNING!CAUTION!
Always stop the tractor or skid steer, set brake, shut off engine, remove key, and lower loader to ground before attempting to service. Never leave equipment unattended with engine running.
WARNING!
Do not work under a raised loader unless it is securely blocked or held in position. Do not depend on the hydraulic system to hold loader and attach- ment in place.
Check the pins at the ends of the loader arms. Make sure they are locked in place with the linchpins.
Periodically check all bolts to make sure they are tight.
Replace any worn or damaged parts immediately. Do not use attachment with any damaged parts.
When traveling on public roads, whether at night or during the day, use accessory light and devices for adequate warnings to operators of other vehicles. Comply with all federal, state and local laws.
Check visibility. If visibility is impaired, reduce speed or consider other means of transport.
Allow for additional length of loader on tractor while turning. Carry load low.
Select a safe ground travel speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.
When traveling over rough or hilly terrain or when making turns, slow down and use extra care.
Read all the safety warnings in the front of this manu- al and in the manual of tractor or skid steer unit.
REPLACE
SAFETY SIGNS
IF DAMAGED
OR MISSING.
STORAGE
•At the end of the working season or when the pallet fork will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated.
•Inspect the pallet fork for loose, damaged or worn parts and adjust or replace if needed.
•Sand areas where paint is chipped or worn and repaint to prevent rust.
•Always store in a safe place away from children or livestock.
17
