Additional Setup Options
Picture Orientation
Vertical Orientation: If you choose not to mount the camera upside down. Here’s how to flip the picture vertically in the camera so that the display on the TV is the right way up:
1.Press and release C1.
2.Press and hold Setup on the remote until the C1 button lights green.
3.Press Iris Up to flip the picture. Press Iris Down to flip it back.
4.Press Setup again to save this setting.
Horizontal Orientation: You can also use the camera like a rearview mirror by reversing the picture horizontally from left to right:
1.Press and release C1.
2.Press and hold Setup on the remote until the C1 button lights green.
MULTI-CAMERA SYSTEMS
The SentinelPro Camera System is designed so that you can use up to four cameras together. Follow the steps in this section to set up and use your additional cameras.
Setting Up Multiple Cameras
Each camera comes
1. Pick the camera to use as C2. |
Follow the instructions at the |
beginning of the manual to set it up. |
3.Press Focus Up to reverse the picture. Press Focus Down to reverse it back.
4.Press Setup again to save this setting.
Note, if you flip the picture vertically, you also need to flip it horizontally. This also makes the left and right movement buttons work the correct way for upside down mounting.
Up and Down arrows flip the camera image from left to right (mirror image).
Up and Down arrows flip the image from top to bottom.
2. Set the mode switch on the bottom |
of that camera to Program. |
Bottom of camera
3.Press C2 on your remote control to set this camera to C2.
4.Set the mode switch back to
Transmit Enable.
Repeat these steps for the rest of the cameras, using C3 for the third camera and C4 for the fourth camera.
22 | 23 |
