Advanced Onscreen Menu Options
Onscreen Camera Label (ID)
The SentinelPro Camera can display a title or label for the camera on screen. This can be useful when you have more than one camera and want to identify them easily.
·Select characters from the available list to set the title you want to use.
·UP: Sets the position for display of the title to the top of the screen.
·DOWN: Sets the position for display of the title to the bottom of the screen.
If you don’t select your own title, the camera will default to displaying the camera’s address setting as the title – “CAMERA A1” for example.
Use the Up and Down arrows to select the desired position on the screen (up/top or down/bottom). Then use the Up and Down arrows to select characters from the screen above, selecting each character with the Right Arrow. Then back out to the main menu with successive presses of the Left arrow.
Advanced Onscreen Menu Options
Restore Presets (defaults)
The settings in the PRESET menu work to set the camera back to its default configuration. This will discard any changes you made in any of the other video settings menus.
·PRESET: When you select this option and change it to “ON,” all the settings in the camera will be changed to their defaults. The camera will reset itself, so the picture will go dark temporarily.
·INITIAL: When selected, the camera will initialize autofocus by focusing through the entire range of the lens.
·PHASE: This option is not enabled in the camera and cannot be changed.
36 | 37 |
