BASIC CAMERA OPERATION
Once you have the camera set up, you’re ready to start using it. It’s easy to get started. Here’s how you use the remote to control the camera:
SECURE VIDEO CONNECTION SETUP
If you prefer a secure video connection, you can use a video cable to connect the camera directly to your TV. This setup does not use the wireless video receiver.
Select the camera
Press C1 to select the camera.
Move the camera
Use the arrow buttons to turn the camera left or right (called panning) and up or down (called tilting).
Focus
When you move the camera, you may need to press Autofocus to bring your subject into focus.
Center
Press Center, to move the camera back to its starting position
Zoom
Press Zoom In to zoom closer to your subject and see more detail. Press Zoom Out to see a bigger area.
1.Turn off the camera’s wireless transmitter: Locate the transmission switch on the bottom of the camera (see picture below). Select Transmit Disable. This turns off the wireless transmission of the video signal from the camera.
Select
Transmit
Disable.
2.Connect the camera to power: Plug the camera’s power supply into a standard wall outlet. Plug the other end into the camera. Remove the protective cover from the camera’s lens.
12 | 13 |
