Xantech 17294 Rp INSTALLING THE 291-00IR RECEIVER, INSTALLING THE INJ94 INJECTOR, Remote Room

Injector, you must use a Xantech BYPASS94 KIT to route the IR commands around the amplifier(s).

When using more than one Xtra Link for more rooms, be sure the RF splitters you use are DC passing types, such as Xantech Models 200-00 (2-way) and 202-00 (4-way). Refer to Fig. 4.

INSTALLING THE 291-00 IR RECEIVER:

Insert the cable mini plug attached to the 291-00 into the jack marked "IR RCVR" on the INJ94 Injector. Refer to Fig. 3.

Plug the 781C-00 Power Supply cord into the jack marked "+12 V" on the INJ94 Injector. Plug the 781C- 00 into a 120 VAC unswitched outlet after you have made all other connections.

Position the 291-00 IR Receiver so that the infrared beam from the handheld remote control has a direct view to the front of the unit, within 20 feet.

Satellite Dish, Cable, Etc.

REMOTE ROOM

RF IN

2ND

TV

Coaxial Cable

Room-to-Room Coaxial Cable

SATELLITE

RECEIVER

RF IN OUT TO TV (Back Panel)

Coaxial Cable

VCR

RF IN OUT TO TV (Back Panel)

Coaxial Cable

Fig. 3 Basic Xtra Link Hookup

MAIN ROOM

RF SPLITTER
2-Way			1ST
		RF IN
			TV
OUT	OUT
	IN

Coaxial Cable

INSTALLING THE INJ94 INJECTOR:

Connect one of the two short coaxial cables between "TV" on the INJ94 Injector and "RF IN" on the TV in the Remote Room. Connect the room-to-room cable to "INPUT" on the INJ94 Injector.

2



172-94