Important Safety Information

Important: Before installing and using your XPower Plus, be sure to read these safety instructions and keep them handy.

CAUTION

Do not connect any AC load that has its neutral conductor connected to ground to the XPower Plus.

CAUTION

Do not connect the AC output of this inverter to any other source of power such as an electrical panel which itself may be AC powered from a utility generator or other source. Damage may occur.

General Precautions

1.Before installing and using the inverter, read all appropriate sections of this guide as well as all instructions and cautionary markings on the inverter and the batteries.

2.Do not operate the inverter if it has received a sharp blow, been dropped, or otherwise damaged. If the unit is damaged, see “Warranty” on page D–2and “Return Material Authorization Policy” on page D–3.

3.Do not disassemble the inverter. It contains no user-serviceable components. Refer servicing to qualified service personnel only. Attempting to service the unit yourself could cause electrical shock or fire. Internal capacitors remain charged after all power is disconnected.

4.To reduce the risk of electrical shock, disconnect AC and DC power from the inverter before working on any circuits connected to the inverter. Turning off the On/Off Switch will not reduce this risk.

5.Do not expose the inverter to rain, snow, spray, or bilge water.

v