Battery run time is less than expected.
Possible Cause | Suggested Remedy |
The AC product power consumption is higher than rated.
The battery is old or defective.
The battery is not being charged properly.
Use a larger battery to make up for the increased power requirement.
Replace the battery.
Some chargers are not able to fully recharge a battery. Make sure that you use a powerful charger.
Power dissipation in DC cables. Use shorter/heavier DC cables.
The AC load will not operate. The FAULT light is on.
Possible Cause | Suggested Remedy |
The AC product(s) connected are rated at more than the inverter’s continuous power rating; overload shutdown has occurred.
Use a product with a power rating less than the inverter’s continuous power rating (see Table 1 on
page 30).
39
