22 Xantrex PROwatt™ SW International Sine Wave Inverter Owner’s Guide

Specifications

NOTE: Specifications are subject to change without prior notice.

Physical and Environmental Specifications

Length × Width × Height
• PROwatt SW 700i
• PROwatt SW 1400i
• PROwatt SW 2000i
12.2 × 7.3 × 3.5 in. (31 × 18.5 × 9cm)
14.5 × 9.5 × 4.5 in.(36.9 × 24 × 11.5cm)
16.5 × 9.5 × 4.5 in. (41.8 × 24 × 11.5cm)
Weight
• PROwatt SW 700i
• PROwatt SW 1400i
• PROwatt SW 2000i
5.9 lb (2.7kg)
10.2 lb (4.64kg)
12.05 lb (5.46kg)
Operating temperature 32–104 °F (0–40 °C)
DC Input 700i 1400i 2000i
Input power (max. at full load) 840W 1700W 2400W
Input current
(max. at full load) 75A 155A 220 A
Input voltage range 10.5–15.5Vdc
Low battery alarm Audible, 11V
Low battery cutout 10.5V
Startup or low battery
recovery 12.0V
AC Output 700i 1400i 200 0i
Continuous power 700W 1400W 2000W
Surge power 1400W 2800W 4000W
Output voltage (nominal) 230 Vac RMS ±10%
Output voltage range 230Vac ±10%
Output waveform True sine wave
Output frequency 50 Hz ±0.5Hz
Efficiency Approximately 85–90%
No load current draw < 1000mA

Regulatory Approvals

CE Marking to the following Directives:
Low Voltage Directive 2006/95/EC EN 50178:1997
EMC Directive 2004/108/EC EN 61000-6-1:2007
EN 61000-6-3:2007
PROWatt SW Inverter International.book Page 22 Tuesday, June 30, 2009 9:58 AM