Drip Shield Installation (For Marine Installations)
To install the drip shields:
1.Gather the four screws needed to fasten a single drip shield to a wall.
2.Locate an appropriate setting for the drip shields above the Freedom HF making sure you cover the entire width of the unit.
You can overlay the shields as shown in Figure 10 below.
3.Fasten the screws through the holes in the drip shield into the wall. See Figure 9.
FREEDOM | 0001 |
HF | |
|
|
|
|
Figure 10 Typical Drip Shield Placement on a Freedom HF 1800
32 | Freedom HF Installation Guide |
