Installation Tools and Materials

You will need the following to install the Freedom HW:

❐Wire stripper

❐Mounting screws or bolts

❐#2 Phillips screwdriver

❐Wrench for DC terminals (1/2 inch or 13mm or adjustable)

❐AC cable (i.e. 2-conductor-plus-ground cable), sized appropriately for load and application

❐Wire nuts or crimp connectors for AC wire and appropriate tools

❐DC cable, sized appropriately for load and application

❐Lugs for DC cables to fit 8 mm (5/16 in.) DC stud terminals) as well as appropriate tools (e.g. crimping tool)

❐AC and DC disconnects and over-current protective devices

High Level Overview of Installation Steps

Installing the Freedom HW includes the following steps.

1.Ensure that AC and DC power are both OFF.

2.Mount the inverter securely and permanently in one of the acceptable orientations.

3.Connect the Equipment Grounding Terminal to the equipment ground bus.

4.Connect the AC input wiring to the AC source panel.

5.Connect the AC output wiring to the AC load panel.

6.Connect one end of the DC negative cable to the negative of the battery, and the other to the negative terminal of the unit.

7.Install an appropriately sized fuse and DC disconnect in the positive cable.

8.Connect the DC positive cable to the positive of the battery, and to the positive terminal of the unit.

9.Close the DC disconnect switch.

Do not proceed with installation until you have read “Safety Instructions” on page 1–3.

1–4	975-0468-01-01

This guide for use by qualified installers only

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.

Xantrex Technology HW 1000 manual Installation Tools and Materials

Models: HW 1000