Personal Precautions When Working With Batteries

WARNING: BATTERIES PRESENT RISK OF ELECTRICAL SHOCK,

BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE OR

EXPLOSION FROM VENTED GASES. OBSERVE PROPER

PRECAUTIONS.

1.Study and follow all of the battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

2.Add distilled water in each cell until battery acid reaches the level specified by the battery manufacturer. This helps to purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer's recharging instructions.

3.Make sure the area around the battery is well ventilated.

4.Never smoke or allow a spark or flame near the engine or batteries.

5.Use extra caution to reduce the risk or dropping a metal tool on the battery. It could spark or short circuit the battery or other electrical parts and could cause an explosion.

6.Remove all metal items, like rings, bracelets, and watches when working with batteries. Batteries can produce a short circuit current high enough to weld metal to skin, causing a severe burn.

7.Have someone within range of your voice or close enough to come to your aid when you work near a lead-acid battery.

8.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

9.Wear complete eye protection and clothing protection. Avoid touching your eyes while working near batteries.

10.If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eye, immediately flood it with running cold water for at least twenty minutes and get medical attention immediately.

11.If you need to remove a battery, always remove the ground terminal from the battery first. Make sure all accessories are off so you don’t cause an arc.

975-0468-01-01

vii

This guide for use by qualified installers only

Page 8 Page 10
Page 9
Image 9
Xantrex Technology HW 1000 manual Personal Precautions When Working With Batteries
Page 8 Page 10

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents