Basic Installation Procedures

 

 

AC shore power

A source of 120 V, 60Hz sine wave alternating current is needed to

 

provide energy to charge batteries and pass power through to AC loads.

 

This source is usually the utility grid (power company) or an AC

 

generator. An automatic or manual AC source selector switch can be used

 

to switch between the multiple sources of shore power to the Freedom

 

HW system.

 

The AC source feeding the Freedom HW must have the neutral conductor

 

bonded to ground. When the inverter passes shore power through, it will

 

lift the bonding relay on the output and will rely on the input being

 

bonded in order to ensure that the power delivered to a sub panel is

 

properly bonded. See “AC Output Neutral Bonding” on page 1–9 for

 

more information on bonding relay operation.

 

 

 

Important: Throughout this manual, the term “shore power” refers to AC

 

input power from a utility grid, generator, or other AC source.

Generator

The Freedom HW is compatible with most generators which produce

 

nominal 120 Vac 60Hz sine wave AC power.

 

Since the DC charging current limit of the Freedom HW may be

 

configured to provide as little as 7 A it is possible to use very small

 

generators with the Freedom HW to charge batteries. The Freedom HW

 

has been tested with generators of various sizes, including some as small

 

as 700W.

AC Disconnect

Most safety requirements and electrical codes require the Freedom HW’s

and Over-

AC and DC inputs and outputs to be provided with over-current

Current

protection (such as circuit breakers or fuses) and disconnect devices.

Protection

 

Device

 

 

AC Input: The circuit breaker or fuse (connected through hard

 

wiring) that is used to supply the Freedom HW must be rated at no

 

more than 30A and must be approved for use on 120 Vac branch

 

circuits. The wire used between the breaker and the Freedom HW

 

input must be sized adequately to carry current up to the rating of the

 

input breaker and in accordance with the electrical codes or

 

regulations applicable to your installation.

975-0468-01-01

1–7

This guide for use by qualified installers only

Page 18 Page 20
Page 19
Image 19
Xantrex Technology HW 1000 manual HW system
Page 18 Page 20

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents