Step 2: Choosing a Location for the Freedom HW

WARNING: Fire and explosion hazard

This equipment contains components that tend to produce arcs or sparks. To prevent fire or explosion, do not install the Freedom HW in compartments containing batteries or flammable materials, or in locations that require ignition- protected equipment. This includes any space containing gasoline-powered machinery, fuel tanks, or joints, fittings, or other connections between components of the fuel system.

WARNING: Fire hazard

To reduce the risk of fire, do not cover or obstruct the ventilation openings. Do not install the Freedom HW in a zero-clearance compartment. Overheating may result.

The Freedom HW should only be installed in locations that meet the following requirements:

❐Dry. Do not allow water or other fluids to drip or splash on the Freedom HW. Do not mount the Freedom HW in an area subject to splashing water or bilge water.

❐Cool. Normal air temperature should be between 21 °F and 165 °F (–20 °C and 60 °C)—the cooler the better.

❐Ventilated. Allow at least 5 in. (13cm) of clearance at the DC end of the Freedom HW for air flow, 1 in. (2.5cm) on each side, and 2 in. (5cm) at the AC end. The more clearance for ventilation around the unit, the better the performance. Do not allow the ventilation openings on the ends of the unit to become obstructed.

❐Safe. Do not install the Freedom HW in the same compartment as batteries or in any compartment capable of storing flammable liquids like gasoline.

❐Close to the battery compartment and the AC source and load panels. Avoid excessive cable lengths (which reduce input and output power due to wire resistance). Use the recommended cable lengths and sizes, especially between the battery banks and the Freedom HW.

❐Protected from battery acid and gases. Never allow battery acid to drip on the Freedom HW or its wiring when reading specific gravity or filling the battery. Also do not mount the unit where it will be exposed to gases produced by the batteries. These gases are very corrosive, and prolonged exposure will damage the Freedom HW.

1–12

975-0468-01-01

This guide for use by qualified installers only

Page 23 Page 25
Page 24
Image 24
Xantrex Technology HW 1000 manual Choosing a Location for the Freedom HW
Page 23 Page 25

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents