Introduction

The XPL series provides medium levels of power (up to 125 watts) in a compact and attractive case style using linear regulation.

High resolution controls allow precise setting of voltage and current levels which are indicated on accurate and highly legible digital meters.

Excellent line and load regulation is matched by very low noise and good transient response. Improved power efficiency ensures that the units require no fan cooling.

The XPL 30-2D has two independent isolated outputs each with a 0 to 30V, 0 to 2A capability. The outputs operate in constant voltage or constant current mode with automatic crossover and mode indication. Each output has its own on-off switch. The outputs can be wired in either series or parallel to provide voltages up to 60 volts or currents up to 4 amps. The XPL 30-2T has, in addition, an Auxiliary ‘logic voltage’ output with a 2A current capability. This output can be preset between 1.5 volts and 5 volts via a front panel control.

The XPL 18-3, XPL 30-1, XPL 30-2 and XPL 56-1 are single output supplies capable of supplying up to 15V/5A, 18V/3.3A, 30V/1A, 30V/2A, 30V/3A or 56V/1.1A respectively.

The XPL series incorporates separate digital voltage and current meters on each output. The meters use bright 14mm (0.56”) LED displays and have an update rate of 4 per second providing near instantaneous response. Simultaneous metering of voltage and current provides accurate information “at a glance” and avoids any possibility of misinterpretation. When an output switch is set to “off”, the current limit setting is displayed enabling conditions to be set before the load is connected. With the right-hand main output off the right-hand meters can be used to momentarily display the preset Auxiliary voltage and current limit.

The XPL series has been designed to meet the stringent requirements of relevant IEC standards for safety and EMC. All outputs are intrinsically short circuit proof, and are protected against external voltages and reverse currents.

 

Table of Contents

Introduction

2

Specification

3

EMC

5

Safety

6

Installation

7

Operation - Main Outputs

8

Operation – Auxiliary Output

9

Operation - General

9

Calibration

10

Maintenance

11

Instructions en Francais

12

Bedienungsanleitung auf Deutsch

17

Istruzioni in Italiano

22

Instrucciones en Español

27

Warranty Information

32

2

Page 2 Page 4
Page 3
Image 3
Xantrex Technology XPL 30-2T, XPL 30-2D, XPL 18-3, XPL 56-1, XPL 30-1 manual Introduction, Table of Contents
Page 2 Page 4

XPL 30-2T, XPL 30-1, XPL 30-2D, XPL 18-3, XPL 30-2 specifications

Xantrex Technology has established itself as a leader in the power solutions market, particularly with its innovative line of XPL inverter series. This series includes models XPL 56-1, XPL 30-2, XPL 18-3, XPL 30-2D, and XPL 30-1, each designed with unique features and characteristics to meet various power needs.

The XPL 56-1 is a powerhouse inverter known for its high output capacity, making it ideal for larger applications such as recreational vehicles or off-grid systems. With a robust design and advanced thermal management technology, this model can sustain heavy loads while ensuring reliability and efficiency. Its compact structure and lightweight design facilitate easy installation and flexibility in various setups.

The XPL 30-2 and XPL 30-2D models are tailored for users looking for a balance of power and portability. Both are equipped with advanced pure sine wave output, ensuring a clean and stable power supply that protects sensitive electronics. The XPL 30-2D variant features dual output options, allowing simultaneous powering of multiple devices, enhancing versatility for users in diverse environments.

For those with smaller power requirements, the XPL 18-3 is the perfect choice, offering a smaller footprint while still delivering robust performance. This model is optimized for efficiency, enabling longer battery life in applications like camping or marine use. Its user-friendly interface allows for easy monitoring and control, making it a favorite among casual users.

The XPL 30-1 stands out for its adaptability, supporting a range of input voltages and providing adjustable output settings. This model is particularly suited for industrial applications, thanks to its rugged construction and ability to withstand harsh environments. Advanced safety features, including overload protection and short-circuit prevention, ensure that both the inverter and connected devices remain safe during operation.

In summary, the Xantrex XPL inverter series provides cutting-edge technology and versatile solutions for various power demands. Each model is engineered with specific features to cater to different user needs, ensuring reliable power during outdoor adventures, industrial operations, or off-grid living. With Xantrex’s commitment to quality and innovation, the XPL series continues to set the standard in portable and stationary power systems.
Top Page Image Contents