Copying Procedure

Xerox 6204 Wide Format Solution 43

Copy
3
Step 2 Entering the Quantity
You can enter up to 99 copies as the quantity.
1Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the upper right
area of the touch screen.
2If you enter an incorrect value, press the <C>
button to clear the entry, and enter the correct
value.
Step 3 Scanning the Original
To scan the original, follow the procedure below.
Important • The original may jam if pressure is applied to the top of the original or it is pulled during scanning.•When originals that contain holes are loaded, make sure that the area with the holes is fed in last, because the original may jam if the area with the holes is fed in first.
1Align the original with the original guide face
down, and insert the lead edge of the original
into the machine until it stops feeding. Then the
machine starts scanning automatically.
•If the scan start mode has been set to [Manual Start], press the <Start> button.Important • Hold the original down flat with two hands (one on either side of the arrow in the graphic) while it is being fed in to the starting position (to avoid minor "crinkles" that can cause dark areas in the copy). If you release the original before it stops feeding, it may result in a jam.
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy Scan Menu Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
.C
1
Numeric keypad
Basic Copy Image Quality More Features
Media Supply Media Type
Select
2 A1
Media Cut Mode
Standard
Bond
Bond
Vellum
Film
Reduce / Enlarge
100.0%
A0 A2
More... More...
Auto %
Auto
50.0%

Ready to copy 1

Qty.
1 A0
Bond
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy Scan Menu Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
.C
1
<C> button