Xerox 701P44973 Interrupting a Copy Job

Interrupting a Copy Job
Xerox 6204 Wide Format Solution 49
Copy
3
Interrupting a Copy Job
You can interrupt a continual copy or print job for an urgent copy job. The fea ture
settings for the current copy job are saved without change.
Note •The following operations are disabled during interruptions.
Interrupting the copy job for another copy
Copying from the memory
•The collated output is disabled during interruptions.
•You cannot interrupt a scan job for a copy job.
1Press the <Interrupt> button on the control
panel.
The <Interrupt> indicator is blinking. It indicates the
interrupt has been requested. The current processi ng job is
suspended.
When the interrupt is ready, the <Interrupt> indicator is lit.
2When the suspended job is stopped, the [Menu]
screen appears. Select [Copy].
Note •When the suspended job was copying, the
[Copy] screen appears without displaying the
[Menu] screen.
3Select the settings such as the magnification
percent for the new job to be processed during
the interruption.
4Enter the required number of copies (1 to 99)
using the numeric keypad.
5Set the original in alignment with the original guide.
For information about the procedure to set the original, refer to "Step 3 Scanning the Original" (P.43).
6When the new job (interrupt job) is completed, press the <Interrupt>button again.
The interrupt mode is cancelled, and the suspended job restarts.
Note •The interruption mode will be automatically canceled after 30 seconds has elapsed without
copy operation.
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy Scan Menu Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
.C
1
<Interrupt> button
Menu
Copy
Scan
Basic Copy Image Quality More Features
Media Supply Media Type
Select
2 A1
Media Cut Mode
Standard
Bond
Bond
Vellum
Film
Reduce / Enlarge
100.0%
A0 A2
More... More...
Auto %
Auto
50.0%
1 A0
Bond