Xerox 8254E Unwinder Control Panel, Switches / Button, Indicators, Unwinder / Winder Operation

2 Unwinder / Winder Operation

2.1.3 Unwinder Control Panel

The Unwinder Control Panel is used to set the operating mode and to display the status of the Unwinder.

4 5

		1			2
					3
			Figure 6. Unwinder Control Panel
2.1.3.1 Switches / Button
	No.	Part name			Function
	1	Automatic		● OUTSIDE ROLL: Used when using paper rolled in the
		Operation		outward direction.
		Switch		● OFF: Feeding device does not operate.
				● INSIDE ROLL: Used when using roll paper rolled in the
				inward direction.
	2	Manual		● NORMAL DRIVE: Feeding device operates in the
		Operation		forward direction.
		Switch		● REVERSAL: Feeding device operates in the reverse
				direction.
	3	Initialize Button		Used to move the position of the tension roller to where
				paper can be fed out.
2.1.3.2 Indicators
	No.	Part name		State	Function
	4	Power Lamp		Lit	● Power is ON.
					● Stand-by.
				Blinking	During feeding
				Off	Power is OFF.
	5	Error Lamp		Lit	Over-current error in feeding motor.
				Blinking	Time-out error.
				Off	No error.

100kg Unwinder / Winder User Guide 7