2 Unwinder / Winder Operation
2.3 Turning the Power ON and OFF
The following section provides procedures for setting the Unwinder / Winder power ON and OFF.
2.3.1 Turning the Power ON
Turn the power ON by following the instructions below.
1.Set the Unwinder / Winder power switch to the ON position. The operation lamp will light.
1
Figure 10. Set the Power Switch to the ON Position
No. | Part name |
1Unwinder / Winder Power Switch
2.3.2Turning the Power OFF
1.Ensure that the printer is
2.Set the power switch to the OFF position. The operation lamp will turn off.
1
Figure 11. Set the Power Switch to the OFF Position
No. | Part name |
1 | Unwinder / Winder Power Switch |
10 | 100kg Unwinder / Winder User Guide |