2 Unwinder / Winder Operation
2.1.4 Winder Control Panel
The Winder Control Panel is used to set the operating mode and to display the status of the Winder.
3 | 4 |
|
1
2
Figure 7. Winder Control Panel
2.1.4.1 Switches
No. | Part name | Function |
1 | Automatic | ● OUTSIDE ROLL: Used when the roll paper is rolled in |
| Operation | the outward direction. |
| Switch | ● OFF: |
|
| ● INSIDE ROLL: Used when the roll paper is rolled in the |
|
| inward direction. |
2 | Manual | ● NORMAL DRIVE: |
| Operation | direction. |
| Switch | ● REVERSAL: |
|
| direction. |
2.1.4.2 Indicators
No. | Part name | State | Function |
|
|
|
|
3 | Power Lamp | Lit | ● Power is ON. |
|
|
| ● |
|
| Blinking | During |
|
| Off | Power is OFF. |
4 | Error Lamp | Lit | |
|
| Blinking | |
|
| Off | No error. |
8 | 100kg Unwinder / Winder User Guide |