Repacking the Color
Printer and Its
Accessories
It is very important that you follow the correct repacking procedure before shipping the color printer. Complete repacking is required. Failure to properly repack the printer can damage the printer’s internal components. You are responsible for any shipping damage to the printer that results from improper or inadequate packaging.
Repacking for shipment consists of four basic tasks. Each of these tasks is explained in detail. If you have questions regarding any of the repacking procedures, call the Tektronix Customer Support Hotline at
Overview
1.Turn off the printer using the On/Off switch and then selecting Shut Down For Moving Printer at the front panel.
2.Remove the maintenance drawer, seal it in a plastic bag, and store the tray on a flat surface. A used maintenance drawer leaks drum fluid if tipped.
3.Make sure that the printer has completed its shut down before moving the printer (after approximately 15 minutes, the front panel goes blank); this allows the ink to solidify.
4.Repack the printer and its accessories using
Repacking the Color Printer and Its Accessories | 1 |
