Turning off the printer
C A U T I O N
To avoid damaging the printer’s internal components, always turn the printer power off using the On/Off switch (this places the printhead in the proper position for safe shipment). Failure to do so may result in damage to the printer’s internal components during shipment. Never turn off the printer by pulling the power cord.
1.Use the
2.At the front panel, immediately select Shut Down For Moving Printer (you have 4 seconds before the display goes blank).
The printer reports the shut down status and takes approximately
15 minutes to cool down. While it is cooling, it is recommended that you remove the maintenance drawer (see the next topic).
C A U T I O N
If you do not select Shut Down For Moving Printer, you must wait
30 minutes for the ink to solidify. Before moving the printer, always wait for the ink to solidify or you may damage the printer.
Removing the maintenance drawer
C A U T I O N
To avoid damaging the printer, always remove the maintenance drawer before moving or shipping the printer. Never ship a partially used maintenance drawer.
1.Open the printer’s front cover.
