Airport Systems
Note: Before performing any tests of the Flash Head Reporting Relay wiring the system must be configured using the PLCHMR System Maintenance and Configuration Menus.
3.7PLCHMR System Maintenance and Configuration Menus
3.7.1PLCHMR System Maintenance & Configuration Menus Overview
The PLCHMR system must be configured as part of the on-site installation. The PLCHMR’s maintenance menus are used to view and modify the site specific configuration data. The maintenance menus use a text window interface along with a command entry prompt. The command entry prompt is posted at the bottom of terminal window and is marked with “maint>”. Configuration data in the maintenance menus contains information about the site’s lights, its reporting mechanism, and the facility information. The site’s light configuration data contains information on how many lights, which tiers the lights are located, and height above ground level. The reporting configuration will specify if the reports are to be made via Ethernet or relays. The facility information will include: the owner, contact number, address, FCC number, Altitude, Longitude, and Latitude.
The maintenance menu system has a hierarchical structure which begins with the Health Monitoring System (HMS) home maintenance menu (see Figure 3.7-2). The home maintenance menu is the initial menu presented after the maintenance login is completed. The home maintenance menu can be recognized by the “HMS Maintenance Menu” title along with its four numbered menu items (See Figure 3.7-3).
PLC Health Monitoring & Reporting Sys | 3-16 | Manual EPM40002083-001 Rev - |
