Honeywell 40002083 installation and operation guide HMS Maintenance Menu Hierarchy

Airport Systems

Press 1

Press 25

HMS Maintenance Menu

1)Light Configuration

2)Report Configuration

3)Facility Information

4)Exit

Press 2 Press 5

Press 3

Press 9

						HMS Report Configuration Menu
						Current Report Method: Relays + ETHERNET
						1)	NONE – Change report method to none
						2)	Relays – Change report method to relays
						3)	ETHERNET – Change report to ethernet
						4)	Relays & ETHERNET – Change report method to include both
						5)	Exit
HMS Light Configuration				Menu
Lamp_ID Tier_Lvl Height Facing_Dir Priority
									Press 1
1)	1	1	151	NW	1
2)	1	1	152	SE	2
3)	1	1	151	SW	1
25) Exit
								HMS Modify Light Menu
								1) Lamp ID: 1
								2) Tier Level: 1
								3) Height : 151 Feet AGL
								4) Direction: NW
								6 Clear All fields
								7)Exit
				Press 7
								maint>1

HMS Facility Configuration Menu

1)OWNER

2)CONTACT NUMBER

3)ADDRESS LINE 1

4)FCC NUMBER

5)Altitude

7)Longitude

8)Latitude

9)Exit

Figure 3.7-2 HMS Maintenance Menu Hierarchy

The following is a detailed set of instructions for navigating and utilizing PLCHMR’s maintenance menu system.

3.7.2HMS Maintenance Menu Login

Access to the Maintenance Mode menus is restricted. A login id and password are used to control access to the Maintenance Mode Menus. To gain access to the maintenance mode menu use the following steps:

a)Connect one of the PC/Laptop’s serial ports to the PLCHMR’s serial port using a female/female null modem serial interface cable as shown in Figure 3.7-1 (Radio Shack Model 03044 Catalog # 55010600 or equivalent). The PLCHMR’s serial port connection requires a DB-9 female connector.

b)On the PC/Laptop start a terminal emulator. Either HyperTerminal or Tera Term is a suitable terminal emulator.

c)Configure the PC/Laptop’s terminal emulator’s serial port parameters to:

i)115200 baud,

ii)8 data bits,

PLC Health Monitoring & Reporting Sys 3-18 Manual EPM40002083-001 Rev -