Airport Systems

5.Verify relay status LEDs DS29-DS31 are lit green, and DS32 and DS33 are off. (DS29 - DS33: Figure 3.6-1, Item, 5,)

6.If you have a White-Only System: After 6 seconds, Verify all Flash-heads are flashing in sync and in Night mode (lowest brightness, ~1/8 second duration bursts at 40 bursts per minute).

7.If you have a Dual (Red/White) System: Verify normal red night mode operation.

(a)Verify that all Flash-heads are OFF

(b)Verify that all Red Lights are ON and flashing properly, and the Red Light Controller does not indicate any alarms in the top-most Red Beacons.

(c)Verify that LED DS36 (EXT RED READY) is lit green (See Item 10, Figure 3.6-1).

8.If you have a Dual (Red/White) System: Perform the following steps to check white night backup operation.

(a)Simulate a Top Red Beacon failure.

On a Honeywell 9LCA Series Control, this may be done with the B1 circuit breaker in the Control. Turn the B1 breaker off to activate the 9LCA Beacon Failure Alarm, or toggle the breaker momentarily to activate the 9LCA Flasher Bypass Alarm.

Other Redlight systems have different controls, and may require removing Red Beacon power at the input power circuit breakers.

(b)Verify that the DS36 (External Red Ready) LED is OFF.

(c)Verify that the DS32 (Night/Red) LED is ON

(d)Verify that the DS33 (Backup) LED is ON

(e)Verify that all the Red Lights are OFF

(f)Verify that all Flash-heads are flashing in sync and in Night mode (lowest brightness, ~1/8 second duration bursts at 40 bursts per minute).

(g)Repair the simulated Red Beacon failure.

(h)Verify that DS36 (External Red Ready) LED is ON.

(i)Verify that the lighting system is still operating white strobes, and not red-lights.

(j)Set the MODE switch to DAY. Wait for the Flash-heads to switch to DAY mode (about 6 seconds). Set the MODE switch back to NIGHT. Wait for the Flash-heads to switch to OFF mode (about 6 seconds).

(k)Verify normal red night mode operation per Step 6 above.

PLC Health Monitoring & Reporting Sys

3-24

Manual EPM40002083-001 Rev -

Page 40 Page 42
Page 41
Image 41
Honeywell 40002083 installation and operation guide Airport Systems
Page 40 Page 42

40002083 specifications

The Honeywell 40002083 is an advanced control system designed for industrial applications, primarily focusing on process control and automation. This device is a part of Honeywell's integrated portfolio that caters to various industries, including oil and gas, pharmaceuticals, and manufacturing. The 40002083 serves as a vital tool for optimizing operational efficiency and ensuring safety across multiple processes.

One of the standout features of the Honeywell 40002083 is its robust architecture, which supports a diverse range of input and output configurations. This flexibility allows the device to integrate seamlessly with existing systems, accommodating both legacy and modern equipment. The system supports various protocols and communication standards, ensuring connectivity with other devices and platforms. Additionally, it offers user-friendly interfaces for easier monitoring and control.

The Honeywell 40002083 is equipped with cutting-edge technologies to enhance its performance. One such technology is its advanced data analytics capability, which provides real-time insights into operational parameters. This feature empowers users to make informed decisions based on accurate data, ultimately improving productivity and reducing downtime. Furthermore, the device utilizes machine learning algorithms to optimize system performance over time by adapting to changing process conditions.

Another significant characteristic of the Honeywell 40002083 is its emphasis on safety and compliance. The device includes comprehensive safety features, ensuring that critical processes remain within safe operating limits. It also helps meet industry standards and regulations, making it a reliable choice for enterprises striving for compliance. The built-in redundancy mechanisms further enhance system reliability, reducing the risk of failures or unplanned outages.

Moreover, the Honeywell 40002083 supports extensive scalability, making it suitable for both small and large-scale operations. Whether an organization is expanding its facilities or upgrading its control systems, this device can easily accommodate new requirements without necessitating a complete overhaul.

In summary, the Honeywell 40002083 embodies a blend of flexibility, performance, and safety, making it a valuable addition to any industrial automation landscape. With its advanced features, cutting-edge technologies, and strong emphasis on reliability, it stands as a testament to Honeywell's commitment to providing innovative solutions for modern industrial challenges. This control system enables businesses to enhance operational efficiency, maintain compliance, and ensure a safer working environment.
Top Page Image Contents